1. Safety warning information
This product is for professional use and not suitable for others.
After receiving the lamp, please check whether the package is complete, and unpack it to check whether the equipment is damaged due to transportation. If there is damage caused by transportation, please do not use this lamp, and contact the local technician or manufacturer as soon as possible.
The lamps should be kept dry, avoid using in humid, overheated or dusty environments, and prevent the lamps from being immersed in water and other liquids.
Caution when using the product: avoid serious or fatal damage caused by fire, heat, electric shock, ultraviolet radiation, and lamp falling off. Before powering on or installing and using, read the instruction manual, follow the operation safety precautions and pay attention to the instruction manual and the warning signs on the equipment.
Do not install the lamp directly on flammable objects.
The minimum distance between lamps and flammables is 0.5M.
Ta=45℃ When the lamp is working normally, its ambient temperature should not exceed 45℃. When the ambient temperature exceeds 45℃, please stop using the equipment immediately.
Do not project the lamp on flammable objects, and keep the distance between the lamp and the irradiated object more than 15 meters.
Lamp beads should be replaced immediately if they are damaged and thermally deformed.
The eyes cannot face the luminous body for a long time.
The protective casing, lens and UV light on the luminaire should be replaced if visible damage occurs, that is, to the extent of failure, such as cracks and deep marks.
Replace any components and accessories in the equipment, and ensure that the equipment is disconnected from the power supply to prevent injury or death due to electric shock.
When unpacking or handling, in order to prevent damage to the equipment, two people must handle the equipment. When hanging lamps, it must be verified that the hanging equipment can withstand more than 10 times the weight of the lamps. After installation, it is necessary to verify that the lamp shell and the installation hook are firm and not damaged. At the same time, use the safety rope as the auxiliary safety of the lamp and fix it on the truss.
The installation, operation and maintenance of lamps and lanterns must be carried out by professionals, and the operation procedures stated in the operating instructions shall be strictly followed.
Lamps should be installed in a well-ventilated place with a distance of more than 50 cm from the wall, and check whether the fans and ventilation holes are unobstructed.
Before installation, please confirm that the power supply used is consistent with the voltage identified by the lamps, each lamp should be properly grounded, and electrical installation should be carried out according to relevant standards. Do not connect the lamp power cord to any other dimming device.
If the external flexible cable or cord of this luminaire is damaged, the cord should be replaced by the manufacturer, its agent or a similarly qualified person to avoid danger.
Please do not place any filters or other items at the light outlet: do not replace non-original parts.
1. Precautions
When using the product, attention should be paid to: avoid serious or fatal damage caused by fire, heat, electric shock, ultraviolet radiation, and lamp falling off. Before powering on or installing and using the product, you must read the manual, follow the operation safety precautions, and pay attention to the manual and the equipment on the device. Do not install the light fixture directly on flammable objects.
Lamps should avoid being immersed in other liquids such as water.
Before installation, please confirm that the power supply voltage used is consistent with the voltage marked on the lamp. Each lamp should be properly grounded and electrical installation should be carried out in accordance with relevant standards. Do not connect the lamp power cord to any other dimming device.
2. Routine maintenance
Lamps are cleaned and maintained, and the service life depends largely on the operating environment and specifications. If you have any questions, please consult the XBK technical engineer for advice. The repair and maintenance work not included in the book is given to the XBK qualified technical engineer.
Notice! Damage caused by abnormal use caused by dust, oil smoke and other reasons is not covered by the warranty.
3. About warranty service
(1) The lamp should be kept dry and avoid working in a humid environment. Intermittent use will effectively prolong the life of the lamp.
(2) In order to obtain good ventilation and lighting effects, pay attention to cleaning the fan, fan mesh and lens frequently.
(3) Do not use organic solvents such as sprinkling essence to wipe the shell of the lamp, so as not to cause damage to the product. All users should strictly abide by the warnings and operating instructions stated above. Any damage caused by misuse is not covered by the company's guarantee, and the failure and problems caused by neglecting the operation manual are not within the scope of the dealer's responsibility. .
9. List of packing accessories
Name Quantity Unit
1 LED Par light
1 waterproof power cord
1 waterproof signal cable
1 product manual
1 product certificate
1 product warranty card
