1. It is suggested that before every storage of leather products, it should be used to remove dust. For general skin products, it is better to go through the skin maintenance oil first, first wipe the oil on a clean cotton cloth, and then scrub the surface evenly to prevent the oil from being wiped on the surface immediately to prevent damage to the leather.
2. The flight case for storing and finishing leather products must maintain natural ventilation. The pure natural vegetable oils of leather products will gradually decrease with the longer time or too much frequency of application. Therefore, even very advanced leather products must be maintained on time.
3. Leather products have strong absorption capacity, so you should pay attention to stain resistance, especially high-end frosted cowhide. Once a week, touch the water with a dry cotton towel and shake it dry. Repeat a few times to perform gentle wiping. If you find all holes, dilapidated and ablated conditions, you do not need to repair it privately, and immediately ask technical professional staff for service items.
4. The hardware on leather goods should be cleaned with a damp cloth after application. If the air is oxidized, you can try to gently rub the hardware with wheat flour or whitening toothpaste.
5. Car paint leather products generally only need to be scrubbed with soft fabrics. For the maintenance of gloss leather products, please apply a small amount of special oil for leather maintenance to the soft fabric, and then rub it on the leather products a little bit; the maintenance of dull leather products, usually only need to wipe the cloth, if it is stained When it is more serious, try to remove it by scrubbing gently with a vulcanized rubber similar to an eraser.
The Steel Black Truss Base Plate for Aluminum Spigot Truss is an essential component in the construction and stability of truss systems. Made from high-quality steel, this base plate provides a strong and durable foundation for the truss structure.
