The following list provides a step-by-step outline process showing how to build the stage and add the various different components together. For each of the separate components, there is a set safety procedure, see the relevant sections in this package.
1. Assess the ground conditions. The ground must be firm and level before beginning.
2. By measurement, determine the rear edge of the finished stage to be a starting point.
3. Assemble the first deck
4. Assemble other decks and fasten together
5. Add bracing between leg frames. (If leg frames are used)
6. Fix the hand rails around the sides of the decks
7. Assemble the modular step units
8. Fix the steps to the stage side.
9. Assemble the appropriate ramps
10. Fix the top of the ramp to the deck using bolts.
11. Apply white / yellow tape to any exposed edge of the stage, ramps and steps.
12. Dress the edges of the stage if required (eg. Skirting)
13. If any electrical equipment is used on stage, the structure should be earth bonded.
