Aluminum Goal Post Gentry Truss for LED Screen

A Goal Post Gantry Truss is a common structure used for suspending LED screens at events and concerts. It is a type of truss system that consists of two vertical posts (the "goal posts") with a horizontal truss connecting them at the top. The LED screen is then suspended from the horizontal truss using rigging hardware.

Here are the steps to create a Goal Post Gantry Truss for an LED screen:

1. Determine the weight and dimensions of the LED screen to be suspended. This information is critical in selecting the appropriate truss system and rigging hardware.

2. Select a truss system that is suitable for the weight and dimensions of the LED screen. The truss system should be able to support the weight of the LED screen and provide adequate clearance for the audience.

3. Determine the height of the goal posts. This will depend on the height of the venue and the desired viewing angle for the LED screen.

4. Install the goal posts in the desired location. The goal posts should be anchored securely to the ground or weighted with ballast to prevent tipping.

5. Connect the horizontal truss to the top of the goal posts using truss connectors. The horizontal truss should be level and securely attached to the goal posts.

6. Attach rigging hardware to the horizontal truss and suspend the LED screen from the rigging hardware. The rigging hardware should be able to support the weight of the LED screen and provide a secure attachment point.

7. Test the system for stability and adjust as necessary. The Goal Post Gantry Truss should be able to withstand wind and other environmental factors.

8. Inspect the system regularly to ensure that all components are secure and in good condition.

Note: It is important to consult with a licensed structural engineer or experienced rigging professional to ensure that the Goal Post Gantry Truss is designed and installed safely and correctly.