How do you manufacture wooden gift boxes?

How do you manufacture wooden gift boxes? 

wooden gift box production procedure

First of all, the purchased wooden boards are processed into plates with the same thickness. The surface should be smooth, and then the sample sawing plate is drawn. The splicing should be done with general white latex. Then fix it and it will dry after a day.

Secondly, the treated wood board must be polished, and then applied with putty. It will be polished in a day. If it is uneven, it must be polished again, because it depends on the smoothness and flatness of the paint. Finally, apply the primer and polish it in a day. You can use water sandpaper to start from No. 600, paint and polish more than 600 until it feels smooth. Finally, apply the finishing coat, which is thin and uniform. It will be finished in a week.

Finally, you can draw some beautiful patterns on the wooden box. If there are special requirements, it is necessary to specially carry out pattern plate making. Soak the prepared pattern in water for a few seconds, take it out and paste it directly on the wooden box as required, and then hang out the water inside with a scraper. After placing it for no less than 10 hours, gently remove the plastic film on it and cover it with a coat of finish paint.