How to assemble lighting truss?

这Lighting trussIt is a truss that is connected to the stage device to illuminate it, and can customize various shapes and sizes as needed. With the increase in commercial activities, the use of lighting truss is more frequent. This article will answer questions that know how to properly install lighting truss.

How to securely install lighting truss?

How to correctly assemble the truss?

Technical characteristics of lighting truss

How to securely install lighting truss?

· Avoid bad weather

It is not recommended to work outdoors in bad weather, so please try to avoid typhoon or heavy rain to prevent harsh weather from affecting the stability of the lighting truss.

· Additional security measures

The stability of the truss can be ensured by adding measures, such as increasing the diagonal struts, tie rods, and reduces lateral wind. In addition, all operators need to wear professional security equipment.

These are safety issues for lighting truss. When installing the lighting truss, we use the lifting platform, but smaller-sized lighting truss does not use this device. In general, the light truss is made of aluminum, so it is very easy to carry and install.

How to correctly assemble the truss?

· Site definition

The first question to be solved in the truss building is the site. Compared with the indoor, the outdoor truss structure needs attention to the level of the ground and the existence of a large population in the movable space. Need to prepare the equipment and parts required during installation. It is worth noting that the main consideration of the installation of the lighting truss is combined with the stage effect.

· Basic installation steps

Depending on the size of the required installation. Measure and marked the position of the chromatographic column with a ruler, and then connect the base to the count head. Place the base after the fixed column position, mount the beam. After the connection, determine the direction of the square, and connect the beam to make the entire frame on the ground. The next step is to install the column.

· Ensure work progress

We need to always monitor the construction situation when installing the lighting truss. The measurement should be performed in a timely measurement, follow-up measurements to observe the settlement of the wheel fetal and load-bearing frame to ensure the assembly quality of the truss.

The above is all information about correct assembly of illuminated truss. When welding and assembling, you must pay attention to the order of the grouping and welding, and strictly perform the process. For any kind of torr, the first thing to do is to install the base and then gradually connect and assemble the components.

Technical characteristics of lighting truss

·stable

When designing the lighting truss, we must ensure that the truss will not collapse due to the sudden offset of the balance. Safety accidents will never be easily happened within the load range of the truss.

· Loading capacity

It will be appreciated that the aluminum truss can usually withstand a average load of 600 kg or higher. This setting can meet the needs of various performances, music, etc. of large-scale sounds and lighting.

All in all, light truss is very important. In addition to large activities, it can also be used anywhere in crowd. We must observe the lightness of the aluminum alloy before purchasing the illumination truss. In general, high quality lighting truss has more appealing appearance.