How to use the foam machine:
1. The foam machine should be used with foam powder.
There are 1: 200 and 1: 330, one kilogram
The powder is mixed with 200 or 330 kg of water, and it can be stirred evenly.
2 Put the water pump directly into the adjusted foam water, the water will enter the water pump to automatically pump water,
Our machines use high-efficiency submersible pumps, which do not require manual irrigation.
3. Turn on the machine, connect the foam machine to the power supply, first turn on the red fan switch to make the fan fully
Start running, after about 30 seconds, turn on the green water pump switch, the foam machine starts
Work,
output a lot of foam
4. When the machine is turned off, turn off the green switch first, and wait for the water in the pump to be completely blown out.
Turn off the red fan again, if the water in the pump is not completely blown out, the water will flow backwards
5.- It is recommended to use a power cord of more than 2.5 square meters for the machine, so that the voltage is stable,
The effect of the foam machine is at its best.
FOSHAN DRAGON STAGE
No.7,Xiaxi Industrial Area,Heshun,Nanhai District,Foshan,528241,Guangdong,China.
+86 136 3132 8997