iron stage
You are here: Home / staging / iron stage
Iron Stage

Specifications

the iron stage in the market mainly are 1.22x2.44m (4x8ft ) and 1.22x1.22m ( 4x4ft )

Height

there are various heights are available to the iron stage 
a. 0.6-1m; b. 1.6-2 m and higher

Load Capacity

750kg/sqm

Material and main tube

galvanized

main tube: Diameter: 50X3mm

Charactoristics

Heavy loading capacity and stable

Demountable, easy to assemble and transport

Self-locking, quick assemble
New Design Steel Fixing Parts for Layher Stage
       Steel Beam
this new design steel beam is used to hold and fix the layher stage deck with end-inserts
  Univeral Connector
the steel beam has universal connector to the layher truss fixing disk
Custom Sizes to Deck Dimensions
layher stage deck can be 1.22x1.22m, 1.22x2.44m or 1x2m; the steel beam also can be custom to produce as the deck dimensions.
New Design Aluminum Fixing Parts for Layher Stage
Aluminum Fixing Parts for Layher Stage
Similar to steel fixing parts for layher stage, aluminum fixing beam (3mm thick) has a long slot for the stage deck to put in, and two adjacent deck frame share one slot to keep the whole stage straight and firm. At both ends, the beam has inserts to connect to layher truss disk.
TUV Tests on New Aluminum Layher Stage
We have called TUV test company to give our new aluminum layer stage loading capacity.
DOWNLOAD REPORT

TUV SUD Certification and Testing (China) Co., Ltd. Guangzhou Branch carried the tests based on "general terms and conditions".

1. Description of test subject:

product name: aluminum quick stage

2. Dimensions:

overall dimensions 2m L x 2m W

unit deck dimensions 2m L x 1m W

frame & transom  aluminum alloy & steel layher truss

panel laminated plywood T18.0 T93.0 NON slip

side aluminum transom 140mm H

leg profile Dia.48 x T3.0

During the test,the specified loads were applied and deformations were measured 5 minutes after load and 5 minutes after load removal.

3. Uniformly distributed load (UDL)
The stage was supported by four poles at four ends.A specified nominal load was uniformly distributed according to Figure1. on the stage and the deflection under this loading condition was measured accordingly.

4. Test information

Surface Area, (m2) 2

UDL, (kg/ m2) 900

Total load applied, (kg) 1800

Measured deflection, (mm) 21

Residual deflection, (mm) 0

5. Test result

No visible damage was found during and after test.

how to get a custom quick stage

step 1

check and measure the site, where the stage shall be assembled. 

step 2

to decide how large of areas on the site to be used for the stage.
 

step 3

to decide the stage shape

step 4

determine the exact length, width, height of the stage

step 5

to decide the type of stage stair, baluster, stage skirting

step 6

detailing the stage topping color, QTY of stairs, stage skirting color and other stage infornation