tips for safe install alu scaffolding

1) Before use, thoroughly check the scaffold that has been built to ensure that all assembly instructions are followed and that the parts of the scaffold are not damaged. 

2) Only climb the scaffold when the scaffold has been leveled and all casters and adjusting legs have been fixed. 

3) Do not move or adjust the scaffold when there are people or objects on the platform. 

4) It can climb into the platform from the internal ladder of the scaffold, or climb into the ladder building ladder, or enter the working platform through the aisle of the frame, or enter the working platform through the opening of the platform. 

5) If a vertical extension device is added to the base part, it must be fixed on the scaffold using an external support or a broadening tool. 

6) When the platform height exceeds 1.20m, safety guardrail must be used. 

7) Install and lock the tension reinforcement on the scaffold according to the instructions to enhance its stability. 

8) When setting up, the brake of the wheel foot must be brake, and the level must be adjusted well. 

9) The bayonet at the connection should ensure that the connection is stable. 

10) ladders, platform boards and opening boards must be hooked well to hear the clicking sound. 

11) When the platform plate of single-width scaffold exceeds 4m, and the platform plate height of double-width scaffold exceeds 6rn, external support plate must be used. 

12) The vertical rod of the external support connection must be tightened, not loose, the lower end cannot be suspended, and the lower end should be close to the ground. 

13) A horizontal support rod shall be used for every two oblique support rods. 

14) The nut of the connecting buckle must be tightened, and the vertical rod and strengthening rod must be firmly stuck. 

15) When the platform height is L5m, the reinforcing rod must be used. 

16) When moving, the brake of the wheel foot shall be loosened, the lower end of the outer support shall be off the ground, and it is strictly prohibited to move when there are people on the scaffold. 

17) It is strictly prohibited to use tools with strong impact. 

18) Scaffolding is strictly prohibited to be used in strong winds and overload is strictly prohibited. 

19) Scaffolding can only be used on solid ground (flat hard ground, concrete ground), etc. It is strictly prohibited to use on soft ground! 

20) All operators must wear safety helmets and fasten safety belts when erecting, disassembling and using scaffolding.