You are here: Home » SHOP » Roof Truss Price » typical A-frame roof truss system » Roof Stage Platform Design Stand Display Truss 12x10x8m
                                                             Currency (Ex-works Price) :
Share to:

Roof Stage Platform Design Stand Display Truss 12x10x8m

  • Dragon Stage

Product Description

packing weight: 2300kg

packing volume: 20cbm

Item
Specification(squre truss) Qty

length main tube(mm) size(mm)
12.00 m Beam(front) 2 sets 3.00 m 50×3.0 CS389×389 8pcs
2.00 m 50×3.0 CS389×389 0pcs
1.00 m 50×3.0 CS389×389 0pcs
10.00 m Beam(side) 2 sets 3.00 m 50×3.0 CS389×389 6pcs
2.00 m 50×3.0 CS389×389 0pcs
1.00 m 50×3.0 CS389×389 2pcs
7.00 m Pillar 4 sets 3.00 m 50×3.0 CS289×289 8pcs
2.00 m 50×3.0 CS289×289 0pcs
1.00 m 50×3.0 CS289×289 4pcs
beam cube Spigot cube 389x389 0pcs
Frame Tower Spigot Sleeve Block S 4pcs
Steel Base S 4pcs
Top Section S 4pcs
electrical hoist,1 Tons 4pcs
Spigot Hinge Section,Height 1m 4pcs
Fibre sling,BA04,2 tons 3m 4pcs
Long outrigger 16pcs
Item
Specification(squre truss) Qty

length main tube(mm) size(mm)
Roof Pillar 2 sets 1.20 m 50×3.0 CS289×289 2pcs
10.00 m Top Beam 1 sets 3.00 m 50×3.0 CS289×289 3pcs
2.00 m 50×3.0 CS289×289 0pcs
1.00 m 50×3.0 CS289×289 1pcs
6.20 m Oblique Beam 4 sets 3.00 m 50×3.0 CS289×289 4pcs
2.00 m 50×3.0 CS289×289 4pcs
1.20 m 50×3.0 CS289×289 4pcs
6.20 m Ladder truss 8 sets 3.00 m 50×3.0 CL30,289*50 8pcs
2.00 m 50×3.0 CL30,289*50 8pcs
1.20 m 50×3.0 CL30,289*50 8pcs
Roof Components
roof conner 4 ways, use for roof beam truss CS289×289 2pcs

roof conner 5 ways, use for roof beam truss CS289×289 0pcs

Connect plate with clamp 2pcs

Single clamp 16pcs

Double clamp 8pcs

roof canopy material:pvc, Blue Colour or customized. 208.96 1pcs
Item
Specification(squre truss) Qty

length main tube(mm) size(mm)
5.00 m Wings Beam 2 sets 3.00 m 50×3.0 CS389×389 2pcs
2.00 m 50×3.0 CS389×389 2pcs
1.00 m 50×3.0 CS389×389 0pcs
7.00 m Wings Pillar 2 sets 3.00 m 50×3.0 CS289×289 4pcs
2.00 m 50×3.0 CS289×289 0pcs
1.00 m 50×3.0 CS289×289 2pcs
Wings Tower Spigot Sleeve Block S 2pcs
Steel Base S 2pcs
Top Section S 2pcs
electrical hoist,BA05 1Tons 2pcs
Spigot Hinge Section,Height 1m 2pcs
Fibre sling,BA04,2 tons 3m 2pcs
Long outrigger 8pcs
motor cotroler
1control 8pcs, with Handle case 1pcs

The overall dimensions of this stage truss system are specified as follows: a length of 12 meters, a depth of 10 meters, and a height of 8 meters, accompanied by two 5-meter wings on either side. These dimensions are carefully calculated to ensure the structural integrity and spatial requirements necessary for a successful event setup.

The inclusion of six electric chain hoists serves a dual purpose within the stage truss system. Not only do they facilitate the efficient and safe lifting of heavy equipment and materials, but they also contribute to the overall versatility and adaptability of the structure. By providing a reliable means of adjusting heights and configurations, the electric chain hoists enable seamless customization according to the specific needs of each event.

Furthermore, the incorporation of PVC covers for the roof introduces an element of practicality and weather protection to the stage truss system. By strategically placing these covers in segmented areas, the structure gains enhanced resilience against external elements such as rain, wind, and sun exposure. This not only safeguards the equipment and performers underneath but also adds a visually appealing dimension to the overall design.

Related Articles