Safety Instructions for Electrical Hoist of stage truss system

⚫ Following safety instructions must be obeyed to prevent personal injuries or material damages!

⚫ Don’t let unqualified people to operate the hoist.

⚫ Be sure to follow safety regulations (Clean personal protective equipment/work areas and indicate safety regulations in areas where these regulations must be followed )

⚫ Be always ready to press the emergency stop button during operation to disable all functions.

⚫ Don’t operate the hoist beyond the maximum working load marked on the hoist. Vibration of load or accidental collision with objects generate extra load.

⚫ Before operations, check whether the load is correctly fixed and mounted on the hook. The locking plate of the hook must be locked up correctly.

⚫ Don’t drive the hook rack to the bottom of the hoist. Don’t drive the chain to be completely off the chain bag until the bump stop at the end of the chain touches the end of the hoist, or else the chain will be broken and the load will fall off.

⚫ Don’t carry people with the hoist.

⚫ Don’t twist the chain (e.g. rotate the hook rack )

⚫ Don’t transport load when there is any person nearby. Don’t move the hook above people no matter it is loaded or not. Don’t walk under the load.

⚫ Don’t shake the load deliberately.

⚫ Don’t shake the load deliberately.

⚫ Don’t disassemble the hook pin.

⚫ Don’t suspend the load on the clamp of the hook, or else the hook would be damaged to make the load fall off.

⚫ The load must be always lifted up from the floor, and don’t increase load of the hook that has been lifted up.